Description
LCT-11 load cell tester
The LCT-11 is a stand-alone hand-held device that was especially
designed for full trouble shooting of strain-gage based load cells.
The LCT-11 can check all common types of standard load cells that are available
on the market: 4 or 6 wires at all rated gain outputs. It provides the user with all
essential data needed about the tested load-cell: bridge resistance and integrity,
physical distortion (possibly caused by overload, shock load or metal fatigue) and
it checks the insulation resistance that can point to moisture or chemical ingress.
Features
- Quick testing of strain gauge load cells and scales
- Determination of the load distribution in multiple load cell scales
- Testing for linearity and reproducibility by continuous measurement process
- Very user- friendly interface , complete test within 5 s
- 2- line alphanumeric display with 16 characters
- Rugged ABS plastic housing
- 8- pin connector with Kabelan – connection by screw (included )
- Uses standard batteries 4 x AA (not included)
- Dimensions: 150 mm x 80 mm x 28 mm
- Weight: 250 g
Technical Details
- Testing of the measuring bridge with 1.25 V DC and 10 V DC insulation test with
- Measurement of input and output resistance : Up to 5 ohms at 0.5 ± 0.5 Ω Ω resolution and accuracy
- 16 -bit A / D converter
- Sense – Resistance ( for 6-wire WZ) : Up to 500 Ω at 0.1 Ω resolution
- Insulation resistance: Up to 5 Gohms with 10% accuracy (min > 10 M ).
- The load cell signal relative to LC – Rated load: ± 250% at 0.01 % resolution and 0.1% accuracy ( input resistance > 175 Ω )
- Input – sensitivity : 0.1 … 5 mV / V in steps of 0.0
