Model-7V load cell simulator are used to replace a load cell to quickly check an indicator to see if the indicator is performing correctly.
The smoothly operating 10 turn potentiometer (V in Part Number) will vary the signal to the indicator from 0 to 3 mv/V with an excitation voltage up to 20 VDC/VAC.

Impedance:   350 ohms nominal
Output Ranges:
Fixed rotary switch: 0 to 3 mv/v in 6 steps of .5 mv/v
10 turn vernier with locking graduated dial
OFF: Rotary selection + 0.0 mv/v
FINE: Rotary selection – 0.02 mv/v to +0.5 mv/v
MEDIUM: Rotary selection – 0.06 mv/v to +1.5 mv/v
COARSE: Rotary selection – 0.10 mv/v to +30 mv/v

Note: Vernier ranges may vary from above

Output Accuracy:
Typically                  Max
±0.008%                ± 0.020% of full scale
± 0.00024 mv/v     ± 0.00060 mv/v
or +1 microvolt, whichever is greater

Zero Offset:
Typically                      Max
± 0.00009 mv/v          ± 0.0005 mv/v
or +1 microvolt, whichever is greater

Temp. Coefficient:   ± 5 ppm/°C
Excitation:               20v ac/dc max
Termination: Binding posts – accepts standard banana plug or up to No. 14 wire
Weight: .5Lbs.
Dimensions: 4.5″H x 3.5″W x 2.2″D
Enclosure: ABS Thermoplastic Case

The post Model-7V load cell simulator appeared first on Load Cell Express.