4 or 6 wires @ all rated gain outputs.

The LCT-Ultimate provides the user with all essential data needed about the tested load-cell:

• Bridge resistance and integrity
• Physical distortion (possibly caused by overload, shock, load or metal fatigue)
• Checks insulation resistance (can point to moisture or chemical ingress)

Main Features

• Fast testing of load cells and scales
• Can be used to check multi load-cell scale alignment.
• Continuous signal reading allows for checking linearity and repeatability
• Very user friendly, full test within 5 seconds

Specifications

• Input and Output resistance: up to 5000 ohm at 0.5 ohm resolution
• Sense resistance (for 6 wire L/C): up to 500 ohm at 0.1 ohm resolution
• Insulation resistance: Max:> 5000 Mohm and Minimum: <10 Mohm
• Load cell output in percentage of full scale: ± 250% at 0.01% resolution (input load > 50?)
• Gain adjustment: 0.1 - 5 mv/V steps of 0.01

Hardware and Accuracy

• Bridge testing: 1.25 Vdc
• High resistance testing: 10 Vdc
• A/D resolution: 16bit
• Resistance accuracy: ± 1 ohm
• High-resistance accuracy: 10%
• Load Cell output accuracy: 0.1%

General

• Power source: 4 AA batteries (not supplied)
• Connector: 8 pin screw terminal (supplied with the unit).
• Enclosure material: ABS
• Display: 16x2 alphanumeric
• Size: 150mm x 80mm x 28mm
• Weight: 250gr.
• in a small protected carrying case

Specification sheet